New Posts  All Forums:

Posts by dmcvie

Ebay express is a good source, so is Ram mounts (http://www.ram-mount.com/products/pocketpcs.htm). I ran a search for "GPS cup holder" and found lots of hits on ebay express. I've ordered the Q1 mount from Ram mounts, and the cupholder...
Well that was pretty easy, after I started looking for GPS mounts. Thanks everyone for the suggestions. I ended up buying one for a GPS with a detachable mount. I'll mount this to the back of my Q1 and it should work out great. Dave
Hi there, I have a Samsun Q1 touchscreen I use for controlling the theater an dI'd like to mount it on the chairs. I think the best option is to try and find a stand/mount that is premade that fits in a standard cup holder. Anyone...
I've looked all over RemoteCentral and only found a few with the presets only. I'm hoping for the complete set, including scan and "AM/FM". Can anyone assist? Thanks in advance. Dave
Anyone know if these support QAM? I have some earlier ones (I believe) and they only support OTA HD. OTA is not an option at my location, hence the reason I bought the F3Q card ;-) Thanks Dave
Thanks All for your suggestions! I'm using a good quality component video cable to connect from the transcoder to the component inputs on the projector - the Sony cable sucks. The reason I wanted to go with the component cable was so...
Hi All, In an effort to get my HTPC showing 1-1 with my Sony HS-10 I recently purchased the Radeon 9600 card, moving up from an Nvidia card. This week I must have sunk 10 hours in the bulb life trying to get it so show 1368x768, still...
Hi All, I recently received my Sony HS-10 projector and I’m attempting to connect it to my HTPC using an Audio authority 9A60 VGA->Component converter. The first one I had was (apparently) dead out of the box so they just sent a...
Thanks Adam, that helps my understanding. I took a look at your pictures, Great Job! I hope to accomplish a similar look. Is the entire rear of you screen wall covered in Insulshield? Can you tell me where you got it? I was going to...
Thanks Scott, Good idea on the Velcro. I'm wondering if there any any "accoustical" concerns for this type of construction or method of hanging them? (Dennis )?? Sure it has to sound good, but it has to look good too. Dave
New Posts  All Forums: