Posts by Doug G

Did a little searching and just found the article I read which mentioned the restoration efforts. Specifically the passage I remembered regarding the audio was this: "The 5.1 DTS-HD MA soundtrack is also brand new for this Blu-ray...

I've been patiently waiting the last few days to see if anyone else who recently received this blu-ray title had a similar negative opinion on the sound as expressed in this post a few pages back? The reviews I've read seem to focus...

Quote: Originally Posted by rr6966 I will probalby wait for the extended Blu's to be released individually for $15 per movie without extras ( you know that's how it will be for Walmart ), and then buy. I still have both the theatrical...

Darren - did you have any discoloration - e.g. uniformity issues, mainly very light horizontal brownish areas which show during white scenes/patterns - or was it strictly limited to decreased light output? My RS1x developed the dreaded...

Yeah, this thread has gotten way off topic lately....but I think you're being a little harsh. I also purchased the TC from Amazon UK in early January and I did eventually receive it by the end of the month. It ships standard mail (first...

Since I left it set to normal and start the unit in that mode directly, it hasn't flickered even a single time in over 8 hours of viewing time. Can't explain why its different (sure there must be a reason) but since its not flickering...

Quote: Originally Posted by Roger Dressler Nor will I weigh in on dipole calibration offsets. But I can illuminate the Dolby comment: That was aimed at production monitoring in mixing trucks. These are much smaller spaces than any...

I use two sets of custom-wired (to produce matched dipole pairs) Monitor Audio BFX surrounds as my surround and rear channels. Despite the fact that they're within 1dB of the sensitivity rating of my mains and at roughly half the...

Well looks like all those hours in high lamp mode actually did some good! I'd left it set to low lamp mode last time I had it on so it started in that mode last night. Four hour viewing session, no flickering! I was actually quite...

Anyone brave enough to put a non-OEM lamp in their RS1? At about 1000 hours mine started flickering again in low lamp mode. A couple 5 hour stints on high didn't really cure it like it had in the past. Ran it for 30+ hours (total, not...