Posts by wireburn

On the Google search page here's what's in the meta description line: "This is a discussion forum dediacted to Home Theater and the products used". Notice the misspelling. -Mike

960p: PowerStrip timing parameters: 1440x960=1440,88,160,40,960,1,3,60,84857,1 Generic timing details for 1440x960: HFP=88 HSW=160 HBP=40 kHz=49 VFP=1 VSW=3 VBP=60 Hz=48 VESA detailed timing: PClk=84857.00 H.Active=1440...

I don't find the flicker annoying at 48Hz with my 9PG XTRA. Sure, if you're going to be viewing a bright desktop it might be a problem, but for video material I never notice it. The settings I use are 1440x960, 48Hz for DVD and...

Quote: Originally Posted by gnk979 What's going on and where is everyone ? Wish I knew. I need some help tuning CBS and NBC with the new Comcast lineup in Muskegon. Please? Thanks, -Mike

No go on adding the channels manually. "No Signal". I even tried installing my old Fusion Q/T to see if it would pick up CBS and NBC. Still no go. I hope this doesn't last... Any other suggestions anyone? Thanks, -Mike

Hey thanks, TripleD. I'll see if I can get those channels added manually. -Mike

Quote: Originally Posted by tvanov Comcast GR does NOT encrypt locals. I get them all. They do encrypt all other HD. You might want to rescan. It could be just local variations. I tried to set up a MyHD 130 for a friend in Jenison...

Comcast in the GR area encrypts their locals over QAM. How can they get away with this? I thought they had to keep those in the clear per the FCC. -Mike

Oops, ya 1208, under the lid, OK. Adjusting those pots is part of a full setup, so I don't see why he wouldn't do that. You're right though, Pat, it may be better for him to get familiar with the basic setup before delving into the...

It does look like you have a mechanical alignment issue, but you may also have a horizontal width problem as well. On the horizontal deflection card there are three width pots that are accessible from the outside of the chassis with...