Posts by Raul GS

Do you know what is the process for flashing them? Does one lose the calibrated settings? If flashing deletes calibration, can one just write down the calibrated settings and then enter them again after flashing or do the numbered...

Quote:Originally Posted by cschang Unfortunately, unless you buy a standalone Trinnov unit, you won't be able to do this.Actually, there are ways to work around this problem. If he uses a high-pass (either passively (x-over) or...

Kraine, Just to clarify, the colors on this projector don't calibrate well?

I'm obviously doing something wrong when I search. I searched again after your post and I still could not find a design using the SEOS12 and the JBL 2206

I know Noah asked this before, but I don't remember the response. Is anyone designing a speaker using the SEOS12 and the JBL 2206?

If you are using pre-outs, the simplest way would be to use active speakers (and change their volume through the speaker's controls) or amps with "volume controls".

Quote:Originally Posted by N8DOGG So then anything you mod or build will be the same. Modding the fan on any of your amps will make it's UL testing invalid, among all the other stuff we do.Actually, this is one of the reasons you...

Bossobass, I apologize for overstating the case (to be honest, I thought UL approval was more similar to CSA); however, laws and regulations in many municipalities, and states require many products be independently tested to specific...

Quote:Originally Posted by notnyt If you are in pro sound, you should not be using these clones. Amps with higher QC and warranties should be used. Sure, you may get lucky and get a higher performing unit, but you may also have an...

Quote:Originally Posted by bhazard Unless you have the financial backing and a good lawyer in case a patent/copyright infringement claim were to be sent from LG, that would not be a good idea.These amps lack UL approval. If a fire...