Posts by ifor

You can place the router in the living area. If you place the modem in the distribution panel, ethernet to the router in the living area, ehternet back to the panel to a switch for best of everything. You may want to run 3 cat5e lines...

Depends on how big the condo is and how strong the wifi signal would be from the closet, is where you want to place the wireless router. In a condo, the closet, ithink, would be strong enough to get good signal everywhere. You want to...

Can you place the amp and speaker selector to the left or right of the opening? You wont need access to them once they are set. Check Monoprice or Parts Express for a speaker selector. You will have to have an impedance matching circuit...

Crown has the 1-VCAP and the 4-VCAP if you are looking at replacing the units you have in your home. I wouldn't replace then with the newer volume controls as the wattage would be very high for the phone wire to handle.

fyi, it's a potentiometer.

It's damn near impossible to replace those volume controls with new current models. I ran into these a few years ago and we had a hell of a time trying to get the new speakers we replaced to work with the existing wiring which was 3...

From Snap's website: Shielded CAT5e/CAT6 and shielded RJ45 connectors are strongly recommended for this product. Unshielded or improperly terminated cables may be susceptible to video dropout problems from ceiling fans and other EMI...

Cable, Directv or Dish?

There are certain ones made for use in a distribution panel like your OnQ. This one is made to snap into the holes in the distribution panel. And all the connections are on the...

You don't divide it like that. It will be fine. Keep in mind most background speakers would rarely use 18 watts.