Posts by meski

Mark I have worked out that the optus tv box outputs an interlaced signal and the ISS component card only likes a progressive signal. I'm having a cypress de-interlacer sent to me so hopefully that will fix the problem. Good call!

I'll take one for the Nec ISS switcher

It was just an anomaly...they were clearing out old stuff they didn't support anymore and didn't care too much about how the got for it.

Is that the latest moome card? The one with the gamma board etc? I would really like to phase out the momitsu v880 dvd player I have. Its about 3years old, with the bnc mod etc. Somtimes it is stubborn in sarting to play a dvd. I'd like...

Could be.....I think you're right about the progressive thing. I checked the booklet that came with the NEC 6010-HD card I bought from NEC in 2003 and it says it is for the ISS-6010 switcher. I have a 6020 switcher. Could that be...

Yes it is....? I'll see if I can check whether the box outputs progressive or interlaced.

Hi Mark. I haven't tried the s-video b/c the optus box doesn't reach and I don't have a long s-video cable. The 1/2 picture that I have isn't bad, but I am prepared for an average pic. I have a standard NEC component card in the...

Hi Sorry I'm in Australia. I don't know what sort of output the cable box provides...whether it is pal, ntsc and what res it does.. I have asked Optus (the provider) but they have no idea.

Hi Thanks for the reply. Its strange al the other sources work properly...the dvd works.....etc...but the cable box only shows half the picture. I have checked the blanking and picture position and everything is as it should...

Hi Everyone I have just had cable tv installed and hooked up to my XG. The cable box has a scart out and a cable that converts it to component. The component cable goes into my NEC switcher which has a component card. The problem...