Posts by myraid

Thanks for the replies on my Play lite query. Most of my Bluray Rips are done using BD Clown and therefore this is not much use to me. Have changed it in the Setup to just Play normally Cheers Shawn

Can anyone tell me what the Play Lite actually does? I cannot seem to find an answer? I still just select Play Media, but was curious since all my Dune players since the firmware update pop up with a small menu asking which option I...

Sorry if this has already been asked, but I cannot find out what Play Lite actually does. After the most recent firmware to my D1's, the popup comes up and I select the Play media option. What does Play lite accomplish? Thanks

Quote:Originally Posted by Mr Eric If everything is on your nas you don't need rsync. You will just have one index built in your nas and accessed through NSF from a shortcut on each dune. Fair enough, however my collection is...

Thank you all for your assistance. I am actually in the middle of recreating my Volumes as I came home last night and found a "degraded" hard drive. I decided to upgrade all my drives in my 1512 to 3TB and use my 2TB drives in my...

Thanks so much. I will try it out and see what happens. I am still building the second volume. it take quite a while.

I recently purchased a Synology DS 1512 along with an expansion unit dx510. I decided for a number of reasons that I would have the primary box, the DS1512 as 1 volume and create a Volume 2 on the DX510. Given it is connected via an...

I use iRule with my Dune players using IP control and it works great. I have yet to find a way to get 2 way feedback working from the Dune units, but would also love to know if this is possible. Cheers

I run two Dune D1's both cat 6 connected to a Linksys router (about 3 years old). The router is connected to a HP Procurve switch. All movies are either full BD rips in ISO format or just the BD movie using ClownBD and are on a Synology...

Quote: Originally Posted by jmpage2 I don't use it. The link aggregation feature requires that you connect both ethernet ports to a network switch that supports aggregation. You likewise need dual bonded NICs also connected to a LAG...