Posts by randman

IdQuote:Originally Posted by jdsmoothie A small 12" HDMI display works well in this scenario. Ideally, you want your primary and secondary displays to be the same resolution so that if both are on at the same time (in my case rare),...

Quote:Originally Posted by TL5 My 8801 is coming Wednesday - getting ready for the install. As far as audyssey goes, I have a projector mounted right over the MLP. Will the fan noise ruin the calibation? Is it possible to run it...

Quote:Originally Posted by markrubin  the Outlaw 7500 is in the house and temporally hooked up and working: I will give it some time to break in this beast has all the weight up front behind the front panel: you can see two...

I have 2 Clark TST-229 and 2 Clark TST-239 tactile transducers. I power all 4 using one ButtKicker BKA1000-N Power Amplifier. This amp provides up to 250 watts per transducer (1000 watts total for all 4). More wattage than I need but...

Quote:Originally Posted by RichB I am sticking with my Pronto 9400. Too bad they finally got the software right after the product was End of Life. With a few small changes the Harmony's could be contenders: - The Ability to...

Quote:Originally Posted by retate    I have attached images of the Marantz rack mount for the AV8801 and a picture of the AV8801 installed with the Marantz rack mount. The rack mount kit itself is the Marantz RMK8003AV. ...

I configured my processor to use PLIIx by default since most material is 5.1 and I have a 7.1 system. What happens if the movie is 7.1 (like DTS HD MA or Dolby TrueHD), and I use PLIIx? Does it still do any processing?

Quote:Originally Posted by GerryWaz Well, I spoke too soon. Hooked everything else back up and the hum is back. The hum also goes away when I disconnect the cable TV connection from the wall, which is something RichB suggested to...

Quote:Originally Posted by audiofan1 Check and see if the IP address on the 8801 has changed, if so changed it on the web control device your using and your back in ! Mine changed by one number after the update I changed it on my...

Quote:Originally Posted by retate    I have attached images of the Marantz rack mount for the AV8801 and a picture of the AV8801 installed with the Marantz rack mount. The rack mount kit itself is the Marantz RMK8003AV. ...