As govschmo said, use the Monitor Out on the Onkyo (composite) to connect to a Line In on the TV. Should be good to go. I do this with my Denon to a 12" TV.
The System Platon is working great. I've had it down for about 2 years now. I got it in 7' x 50' rolls. It was a bit hard to deal with in that size, but I installed almost 2500 sf. Since I installed mine, they came out with a smaller...
I would not put insulation down. It's not a matter of a flood/leak/etc, it's the fact that cement breaths. Condensation will occur on a cement floor once the "living space" is insulated and heated. This is why most basements with...
Quote:
Originally Posted by skola28
I can get RAM that is approved on the Gigabyte site for this board for about $20, so I may just go ahead and buy it.
From what I recall in researching my build, the X2 dual-cores do not support...
Check out this thread from last week for some options. Another option if you have access to the speaker wires would be to put in a speaker selector switch (reverse selector actually). You would have a local amp/receiver by your TV,...
I ran separate cables (RG-6 coax) for this. You can locate these anywhere in the room where it will be convenient to hook up your MP3 player/etc. These then connect back to the CAV as one of the available sources to the system. I use...
Start with the under $3K forum here. You can also check out the over $3K, since the $3K limit is set based on MSRP, and you can find items in that forum in your price range.
Tom
Make sure you are using the correct pairs (not sure how much you are into this). What color are the wires coming in from the phone company (ie, the wires you connect to the first set of punch down connectors)? Standard for line 1...
Or get an AT screen... I mounted my towers (Klipsch KLF-30s) upside down so the tweeter (horn) is at the same level as the center. Sounds fantastic. Sub is also behind the screen, but may try moving it around to find the optimal...
