Posts by tmnjus

Well, to really play it safe, you should go with external amps... I have this amp from HTD, plus another 12 channel amp from Harmon Kardon. I have been happy with the HTD amp. Another, somewhat "messy" option, would be to add...

I have 2 zones with 2 pair of 8 ohm speakers directly connected to the CAV 6.6 and have been running fine for over a year. I also have external amps driving extra speakers, giving me a bit more power for the larger areas. You should be...

Not sure your level of knowledge, etc, but here are a few...

Does it happen on all sources? Try bypassing the Onkyo, and going directly from the source to the TV to see if that eliminates the problem. It may be a handshaking issue. Also, check out the HDMI forum, there may be more info / help...

Popular selections here for "low end" home audio are the Russound CAV or CAM systems. I have the CAV6.6 and am extremely happy with it. I also have the HTD 12 channel amp for driving extra speakers, an HTD center channel speaker, and...

Lots of options available, depending on your requirements and desires. A couple of questions first: Are you ok with just connecting your TVs via RF (Coax)? Do you need HDMI/DVI/Component and audio feeds to any of the sets? You mention...

Let us know the results if you go that route. Tom

How about this?

Don't do it. Here is an excerpt from EIA-569, table 4.8-5: Minimum Separation Distance from Power Source at 480V or less. Unshielded power lines or electrical equipment in proximity to...

Easiest option may be to place a VCR by TV2. Feed the VCR with the TV2 Out, and go to the TV from the VCR via RCA. (Note that some VCRs may not convert the RF input and pass on to the TV...the RCA output is only for playback.) The...