Posts by Fishysan

Quote: Originally Posted by Bob Pariseau It would also be good to know if folks using HTPC sources are now able to get things working correctly WITHOUT having to insert a Geffen DVI Detective between the HTPC and the Anthem. When I...

Quote: Originally Posted by LEVESQUE For those interested, there is a guy in the projector section of AVS that just post a link to the firmware upgrade with clear and easy instructions for the RS-1/HD-1 from 059 (first firmware) to 061,...

Heehee Well unfortunately devices seem noiser today. I don't recall the PS3 being much noisier than the A2 which is noisy too.. but quieter than the stupid 360 DVD and such. Too bad. Mind you I've only watched one movie with the v1.8...

Quote: Originally Posted by LEVESQUE After reading what S. Spears wrote, I'm using: PS3: Output - YCbCr, RGB - Limit (not full...), Super White - On D2: YCbCr 4:4:4 out JVC HD-1: Black level normal, HDMI YCbCr 4:4:4 Cool thanks!...

Ok, so I hooked up a temporary supply for a fan; http://www.arctic-cooling.com/fans2....4&data=2&disc= I noticed though that the "heavy" trigger on the D2 is 200ma rated. There's also the 12v supply for the ir block -...

*looks around wondering where the picture is*

Hey Folks, I've been using the PS3 as my BD player for some time, direct to the RS1 via switching, then with the D2 with my Cinema500 while my RS1 was away, and now finally have PS3 -> D2 -> RS1. The 500 was only 720p out of the...

Well I think I just experienced the PS3 causing a heat problem with my D2 to the RS1 tonight. Watched a BD movie with it, and then dropped in my first game (hadn't bothered buying one since I got it a few months ago!!) and I started...

Hey gang, Finally got my RS1 back, now have it connected to my new D2! WOOHOO! Looks fab. Can't wait to get my CIH lens set up this weekend too to finally try some of the scaling settings I configured in the...

BigT - the "blue screen" is likely because your cable/sat box is renegotiating HDMI handshakes with things. Do you have the repeater set to "no" for all devices? That way it doesn't have to go through the AVM50 to the RS1, and back,...