Posts by Texas steve

Bob, any news on a update?

Any update on the latest upcoming release for the D2V?

I have this projector with a 14" throw on a daylite 106" 1.1 gain (white) screen and it works perfectly

Quote: Originally Posted by Craig Peer  You might try projecting onto a white sheet to start with, and try and decide on a size that you like. Then try the screen section for recomendations - a lot depends on the size...

not the source its cable.   temp move your source closer and use a shorter cable and snow will go away!    or try another cable

I too thought I did not have the second pair of glasses, but then at the bottom of the box, in the corner, looking like padding/cardboard hidden under it was the second pair.  I had to have someone else tell me to look there, and...

yes I uploaded them about two weeks ago, they are the hex codes,   the most important one to me was the discrete power off!!  and it works        

Quote: Originally Posted by Bob Pariseau  ^ Yes. As HDMI LPCM. Sounds great. --Bob Bob, on the 83 did I read where you suggested Bitstream vs LPCM

Quote: Originally Posted by Bob Pariseau  It's described in the Manual. It's just a brief delay before audio un-mutes whenever the format changes, to give the signal a chance to settle down. Choose MIN, MED, or MAX....

so what does the HDMI MUting do Bob?