Posts by Texas steve

Upgraded to 2.14b so far so good, D2V non-3d board.

send a email to Anthem support so they are aware of it. Quote: Originally Posted by spiderv6 Very curious. Tried all of that and couldn't get it to play ball. Rolled back to the official version. All good again. Funny, it worked...

Yep I had the exact problem with my DTV. I simply switched it to another input ( I had it in HDMI2 and move it to HDMI1) and it worked fine. Nick suggested that you reboot your source and Anthem, then plug in your HDMI, then turn on...

yep sure did, and I would get picture only, no sound (I did change the configuration as well so there should have been sound). But is works in port 1 for some reason, so Im just going to leave it there! Quote: Originally Posted by Bob...

Set up as same as 2.11 all I did was upgrade (following the "Deluxe Bob" written procedure). I keept the connections the same so it should have worked. But when I swapped the DTV to HDMI-1 and changed the source accordingly it worked....

Ok loaded 2.14 on D2V w/o 3d boards. All works good EXCEPT one strange thing. In all HDMI inputs my Driect TV will NOT work except HDMI1 (get picture but no sound) . Every other HDMI device (oppo 83 etc) works in all other HDMI inputs...

I would be intrested in anyone with a D2V who installed this on a non 3D version. The one problem I have had after 2.11 to G was always no HDMI output (it would not see the inputs) but FM worked fine. Went back to 2.11 and all good...

On my D2V I have 2:11 working fine, tried to upgade to 2.13G and no sound, so your not alone, Hopefully Anthem is aware of this Quote: Originally Posted by AVfile I've never had a lack of audio problem with any version of FW. All I...

did you get any video out with 2.13B on HDMI 1 or two? What happend to me was I did have graphic overlay (volume, etc) showing up on HDMI 1, but non of the HDMI inputs would work, went back to 2.11 all good. I do not have 3d board. ...

On a D2V? 3d board?[ quote=Kris Deering;21604995]I'm running V2.13b with no issues at all so far.[/quote]