or Connect
New Posts  All Forums:

Posts by Bob Pariseau

^ As far as I know, there is no support for Auto lip-sync in any OPPO players. It is a "feature" that is only expected to be found in AVRs, and even there the makers need to provide a setting to disable it since the meta-data passed back by displays is frequently incorrect. There is something else going on here, and I don't know what it might me. I've not heard of any other cases of folks reporting that the A/V Sync setting is not functioning for Blu-ray playback in the...
^ OPPO is no longer making the BDP-105 in silver. However their newer BDP-105D (Darbee Edition) *IS* available in silver, and should be available through any of the authorized dealers in the UK. OPPO Digital in the US show it as In Stock on their web store page for example. If it is backordered in the UK, that would be only a temporary situation. --Bob
Please reread my post and double check you really have taken those steps, as described, because either we are talking at cross purposes or your player needs service.I'm looking at it right now, and A/V Sync is functioning normally for HDMI 1 video vs. the HDMI 1 LPCM, HDMI 1 Bitstream, and 5.1 Analog audio outputs -- each tested with Spears & Munsil v2, using the Continuous 24p Sync test chart, and with both 1080p/24 and 1080p/60 output tested on HDMI 1 for each. The disc...
This is not normal. First check that your firmware is up to date. Check Setup > Device Setup > Firmware Information. The "Main" firmware version should end "0218". Update as necessary. If more than one portion of the firmware is offered for update, do all of them.I suggest you also do a complete Reset of the 105:1) Remove any disc from the tray. Jot down your settings or Save them to a USB Stick (in Setup > Device Setup > Configuration Mangement)2) In Setup >...
See my post near the top of this thread. For "set and forget" use of Darbee across a wide range of content, I recommend limiting Darbee Hi-def to 35% and Darbee Full Pop to 30%. Use Hi-def with HD content and Full Pop with SD content.Netflix streaming quality is not under your control of course, and if Netflix decides to cut down the bit rate they are sending you at any moment, the quality degrades substantially. Note that each "resolution" shown in the on-screen Info...
A solid green screen -- no video showing through the green -- indicates a copy protection failure. The HDMI handshake is not satisfied that copy protection is working. Most cable TV channels are NOT copy protected, so a key test for this is whether it is only happening on premium channels.A screen that shows normal video, except that it is tinted Ghastly Green, indicates a failure of the HDMI devices to agree whether the data format in use on the cable is RGB or YCbCr. ...
I think you may still not have a handle on this. When using the multi-channel Analog outputs of the player, the Sub output needs to be boosted, external to the player, to match the level of the other output jacks. I'll forego getting into the technical reasons for this, but it's all standard stuff. It can just be confusing if you are not used to configuring Analog setups.The amount of Subwoofer boost needed is either +10dB or +15dB depending on the Analog Speaker...
You two need to update your firmware. A recent firmware change added the ability of the Auto Play function to control video discs as well (such as DVD). Set Auto Play OFF and the disc will load but not start playing until you hit the Play button.Check Setup > Device Setup > Firmware Information. Your Main firmware version should end "0218". You can update firmware over the network, or by downloading the firmware onto a USB stick from the OPPO support page for install...
I suspect you are not waiting long enough for the player to finish booting up. Try using Quick Start instead of Energy Efficient since that eliminates a number of steps in the boot up process.To check this, remove the discrete Netflix command from your power up sequence and make it a separate action. Power up and wait a while, then do the separate action and see if that works. If so, you can experiment with the amount of pause needed before you issue the discrete...
There's not a simple answer to that. I use RGB out of my D2v and it works just fine, so it's not as if the D2v can't do RGB at all. However in the world of HDMI there's a question as to just how far one device should go in its programming to adjust to quirks in other devices. Anthem has done of a ton of adjustments like that over time.My suspicion is that there is some combo of settings in the Pany which is screwing up its HDMI handshake timing, particularly for RGB,...
New Posts  All Forums: