Posts by dssturbo1

Quote: Originally Posted by Hamerdown Seriously...since heat is the killer of components AND plasma's run hot > has anyone thought of adding a cooling fan or two? Thinking, remove the back, cut two holes lower right and left and mount...

Quote: Originally Posted by NickFromWA What's the best/cheapest replacement lamp to get for a WD-62725 (lamp part # 915P020010)? I did a quick check on ebay and I see you can buy "bulb only." Does anyone have a seller to recommend on...

Quote: Originally Posted by CHASLS2 The set this guy was selling was made in 05 so that a very old set. the guy probably paid $7500++ and hopes he can recoup a little of that, but very doubtful anyone would pony up that for a 5 year...

you could go to a local stone supplier and get them to cut a nice granite slab to replace that glass top.

obviously not to difficult as mitsubishi had a built in dvr on their higher end WD=52/62825 dlp models in 2004/5. i think LG had them in a model also a few years back. didn't seem to catch on too good........most prefer their tivo/...

almost a guarantee with this set that other capacitors are failing. very very common issue with the mits WD 52/62x25 sets. You said you replaced them already??? how many did you replace? When Mits does a chassis rebuild they replace...

almost a guarantee with this set that your capacitors/electrical chassis are failing. very very common issue with the mits WD 52/62x25 sets. IF you want to get it repaired it will cost ~$200-300 in labor to a local mits service tech...

as geo says for the size and price it's a decent deal. but get an extended warranty because Mits dlp have horrible reliability rates.

if you can find them. the 60" models... 600M with Turbe's ISFccc patch Pro141 Pro151 6020 50"..... 500M with Turbe's ISFccc patch Pro101 Pro111 5020

sf,.. i just checked and No 3.2, 3.3 and no 12.2 or 16.2 either, ouch....... changed the guide to all channels and those are not there at all. i tried to manually input them using the 3 dash 2 enter route and it comes up with a bonk...