Posts by mherbold

The CMOS I am looking at is also made by micron ( http://www.micron.com/products/partd...=MT9P401I12STC ). My aim is to just feed the raw data directly into a workstation PC. Writing low level device drivers isn't going to be a problem...

I'm sort of a hobbyist and would like to learn how to build my own video camera - I know you can buy a pretty nice CMOS chip (1280x720,60p) for about $50. Basically I just want to put together some lens, CMOS chip, whatever interface...

*bump*

My setup: PC - ATI X700 Radeon card. TV - 61" JVC HD-ILA (this is a 720P microdisplay). PC is hooked up to tv via ATI component cable dongle. I have used powerstrip to get the screen to where there is very little under or...

Make sure you have the .NET framework version 1.1 installed - The ATI control center won't work without it. Use windows update.

Quote: Originally posted by dougpt10 I don't have this problem on DVD viewing or HD viewing. Any thoughts? Most likely its due to the TV station broadcasting a badly calibrated signal. I've seen quite a few TV...

Quote: Originally posted by greywolf It's a software glitch. Great! :-) Quote: All the 3 LNB dishes had 4 outputs. It just isn't possible to have a DirecTV oval dish built for television reception...

Hey all. I live in Far East Mesa in the square mile bordered by Baseline, Ellsworth, Crismon, and Guadalupe. Closer to the Baseline + Crismon intersection. Anyway, I just got the new DirecTV HR10-250 receiver. In the attic I have...

Quote: Originally posted by greywolf as I am that your dish has 4 outputs. I am not using the dish that comes optional at an additional cost with the HR10-250 - I am using the one that a DirecTV tech installed...

Quote: Originally posted by greywolf Do you have it set for a single dish connection? There's a bug in the present software that shuts down the meter. Try setting it to two for a while to check your readings. Even set for...