Posts by guest68

Thanks guys. You have confirmed my suspicions. I know I shouldn't translate my older Denon issues with the newer models. After all, I still own an Onkyo sr502 that operates flawlessly, but I dare say I won't buy one now. (sorry if I...

I apologize if this has been covered, but my searches have been unproductive. I am considering a newer unit to replace my Denon 1909. Looking at other manufacturer's units, it seems that not all have been adjusting the sub channel, I'm...

I forgot that the '.1' (sub) channel was also WAAAAY too high!

Quote:Originally Posted by moman19 It appears our incompetent friends at KSDK are still at it. Although the technical quality of the XXX Summer Olympics from NBC seems to be quite superb, I have noticed that the sound is...

Thanks guys for the quick help. Soft reset fixed both of them! Thanks for the links for the FW update too.

How is it possible? I have two 2160A refurb (from J&R) units that have died at possibly the same time. Tried to use the upstairs one and realized the display was dead and no signal to the TV. Unplugging and replugging did nothing. A...

Quote: Originally Posted by ProjectSHO89 The outside unit is the amplifier, the inside is the power supply (except certain RS units have amps in both modules, it depends on what model you have). It is rarely necessary (and usually...

Antenna booster(s). I live in Washington (50 miles west of St Louis) with an old but large antenna in my brick surrounded attic and am getting GREAT reception of all channels. I use a Radio Shack booster that has one part at the...

That's what I thought would happen. I would also assume that when if I 'amp assign' to 7.1 and try to run Audyssey set up, it won't, if a channel is not operating.

Interesting...... So for all you Audyssey gurus: Since I did the reset procedure and the channel is still inoperable, I set the 'amp assign' to 5.1 & zone 2 and ran Audyssey for the 5.1. If I assign the amps back to 7.1 in hopes...