Jautor,
Could you explain how to use the coax cable to send the signal from a zone 2 receiver output back to a distribution panel?
I have the following problem (s):
1. When my house was constructed I had structured wiring (2...
I had Fairfax Antenna out to the house on Monday, and I can report yet another succesful install from this vendor.
Greg arrived a few minutes late due to traffic, but the install proceeded quite quickly. I had an out of service...
Quote:
Originally Posted by Foxbat121
FYI, Cox purchased Media General. There is no switch. Technically, any cable co can enter Fairfax County to server the public as stated in county web page. In reality, nobody want to lay their own...
Quote:
Originally Posted by navychop
donotremove:
You just threw down raw meat in front of me.
Here's a classic case of the grass is always greener. Fairfax County just couldn't keep Media General as its cable franchise. ...
Quote:
Originally Posted by MrMolding
sfgtwsac,
I'm one of the other South Riding residents. I've used both a Channel Master 4228 and a 4248 YAGI with a CM 7777 preamp -- I had better luck with the 4248 on getting all DC channels....
Quote:
Originally Posted by leesweet
Yeah, you're right, it's S&N. See this note on the SR website for more... :-)
I *think* they actually pull the fiber, not just the orange conduit, but I've not gotten close enough to see. ...
They haven't reached my end of town yet, near Little River, but I've been watching the progress off Edgewater, and I agree it looks fairly clean. I haven't seen Verizon actually putting any cable the pipes yet -- maybe the contractor is...
Quote:
Originally Posted by leesweet
(Good timing... I'm catching up on weeks of this number one thread after being out of town, sick for a week, busy as heck, etc...).
Fairfax Antenna will probably recommend a CM4221, what I have,...
