Posts by sebadooo

New Retail: $6,995. While Installed in rack, it was operated solely by home automation controller - the buttons and dial on this receiver have never been used except during initial setup. As such, the face and the rear of the unit are...

Silly question, but on the 320 - does the light (if enabled) above the disc-slot remain the color blue for the owners out there, or does it turn white during playback? I bought the 320 because the blue light matches my AVR's light...

I love the picture on my new 60GT50, and have no problems at all with buzzing or any other "look for trouble" OCD tendencies (starting at slides to look for dead pixels). However, I still can't get the TV to sit level on the stand. Even...

I noticed the default Sharpness setting is at "50" in the THX mode we're using. Is "50" Panasonic's "0", whereas "49" and below would be considered "negative", or should I turn down the sharpness to "0" because all our sources are in HD?...

Can anybody help me out? We just received a 60GT50 from Amazon. Once the panel itself is on the stand, the screen is not level. The right bottom corner of the screen is nearly an inch closer to the TV cart then the left. A level...

I hear you on the OCD, but how's your OCD going to cope with motion blurring when you're watching football on an LCD, or gaming lag on an LCD? Get the plasma. I went through what you're going through in 2008 when I bought my first...

Hi all, got the 320 tonight. Love it, and the remote too even. However, it's not recognizing my iPhone4 in the USB port. I'm trying to transfer a photo on my iPhone4 onto the 320 so I can select the photo as my user icon. I go to...

Thanks everybody! I feel much better now. I'm leaving the center (HTM62) set to it's new setting - 'Small' (down from 'Large') - but am going to keep the main L/R channels (B&W 685s) set to 'Large' because I am under the impression that...

Well, this sucks. So I've been enjoying the system for 2 years now - what are the chances that I will actually harm the AVR if I haven't already? And would it be obvious that I had done harm if and when something occurs?

So I've been running two 685 bookshelf speakers, as well as the HTM62 center channel on my SC-25 for a few years. I noticed a slight distortion on the center channel during loud volumes, and have since attempted to correct this by...