Posts by tandy1000rl

Thanks guys. Goal is to have the 5.1 AVR playing TV sounds (not the TV itself) fed from a cable box, while simultaneously playing the same audio (in perfect sync) through the whole house audio system to a nearby kitchen area. What is...

Thread title is my question. I know the Sonos introduces a 70ms delay to digitize the line in, making it sub-optimal to send TV audio throughout the home while simultaneously listening to it on a 5.1/7.1 system due to the echo that...

Quote:Originally Posted by jdsmoothie 5. Audio Delay only applies to main zone audio; however, "Video Mode" set to "GAME" (p. 83 OM) will help to reduce any sync issues between same source main/Zone 2 audio. Awesome, and using the...

Quote:Originally Posted by jdsmoothie 1. Technically no, but you can never be 100% certain when HDMI is concerned. 2. Either Bi-amp or Front B would work with in-wall volume switches (although as noted in #5, no center channel...

Long time owner of the 4311ci and love it. Now that I'm building a new house and plan to take advantage of the 2nd HDMI port, I'm looking for advice. My goal is to simply have two monitors displaying the same program material in sync...

Quote: Originally Posted by mogorf Tandy, off-center speaker setup has nothing to do with Audyssey, right? Speakers in a room should always be placed in a symmetric layout, well,... as far as possible. Full stop. Sound stage, imaging,...

So is a consensus forming in this thread that Audyssey and corner placement are not compatible? I didn't necessarily hear the OP suggest that the non-Audyssey config sounds bad, but the consensus solution to fix the Audyssey-enabled...

Quote: Originally Posted by Nickff I recently upgraded my speakers and am curious when setting the crossovers to 80 after running Audyssey might not be ideal... In a very large room where the sub is not "heard" or felt as it would be...

Quote: Originally Posted by jdsmoothie Actually the 2312CI is Pro ready, however, doubt you'll find too many 2312CI owner's buying the Pro kit which costs as much or more than the AVR. Ahh good catch. Thought it was 3312 and above...

Quote: Originally Posted by Zaksbro Hi Tandy, i can find the graph but not sure how to read it. When u say it needs a diff target curve for large rooms how would set that? Hehe...you don't. Only available on Pro-enabled receivers...