Posts by clarksonknight

Quote: Originally Posted by jdsmoothie Set the the CS10 to SMALL with an 80hz crossover and set the Reference Level Offset (p. 44) to 10 or 15, both of which should improve your dialogue issue. Thanks for the...

Okay Denon experts, here's my new problem: I've gone from 5.1 to 3.0 (Polk CS10 + TSi100) due to living in a new apartment complex with thin walls and floors. I ran the auto setup on my 591, and I'm getting too much "thumping" in...

I've noticed that while playing Xbox it sounds like my right front speaker crackles a little bit. I haven't noticed it on any other sources, but haven't fully tested them all either. What's the best way to troubleshoot this? I do need...

Plasmas buzz. Mine does a little bit, doesn't bother me when I'm using the set so no big deal for me.

No idea, I ran the slides for 100hrs straight with no problem.

Quote: Originally Posted by jderimig After I set the offsets for THX mode, I checked Custom mode and the offsets were already applied for Custom. Custom values were the same as the adjusted THX values. Ah yeah, that's right - once...

Quote: Originally Posted by jderimig As far as I know THX and Custom share the same offsets. There are 6 offsets total, 3 for SD (cool, normal, warm) and 3 for HD. At least that is the way my 50G20 worked.... I followed the guide on...

It would probably help to do a little more research before going into the service menu. I believe the 1 and 2 buttons move you through the main menu items. 3 and 4 move you through the sub menu items. I wouldn't take my word for it...

Quote: Originally Posted by Runin Do I have this right? HD source the offsets are input twice? Once with the THX/cinema and again with Custom modes. SD source the offsets are input twice? Once with the THX/cinema and again with Custom...

Quote: Originally Posted by Runin Hi all, I recently purchased a TC-P50G20, and I am very happy with it. Using D-Nice recommended break-in/offsets finished the 100hr break-in and downloaded the calibration guide. Now, I'm having...