Posts by blue_z

Looks like there's some (negative) horizontal pincushion , and some (asymmetrical, more on the bottom than the top) upward vertical bowing. The pincushion distortion should be easy to adjust out. The bowing will be more difficult If...

Quote:Originally Posted by pkepneriv Hey everyone I just got my first CRT projector. It is a NEC PG9 Plus.Congrats.Quote:I downloaded the install and user manual from Curts website,There's also an excellent PJ setup guide for...

Quote:Originally Posted by systemchris My original remote doesn't have an enter buttonThe "Enter" button is usually below the "9" and to the right of "0". The button below the "7" and to the left of "0" is usually "Jump...

Quote:Originally Posted by mdel06 I made it to WEDU but no WXPX, which seems strange to me since they look similar on tvfool.Maybe there's multipath interference on WXPX? You might need to try different locations (both elevation...

Quote:Originally Posted by CZ Eddie All I want/need is 1024x768. Is this going to be possible?.Don't know about the XBR800 (and 4:3 tubes), but when I connect a PC to 3xXBR910 sets (SFP tube, DVI input) the Nvidia video card treats...

Quote:Originally Posted by tluxon I had assumed that meant all three outputs were balanced and had an equal loss.That's a reasonable assumption. Quote:...would it be a reasonable gamble to try a simple and fairly conservative...

Quote: Originally Posted by GeneraLight 1.) Do HDTV CRTs have input lag? What is commonly called "input lag" probably should be called "display lag", since the delay (in question) is introduced after the input port of the TV and prior...

Quote: Originally Posted by jjeff IMO It's a disgrace, properly spec'd and of a decent quality, electrolytic capacitors should last for 30 years or more, at least devices made in the 60s for the most part aren't experiencing such...

The manual for your TV at http://samsung.6c0.net/man/1632/CL_2...al__ver_1_0_/1 or in English http://www.manualowl.com/m/Samsung/C.../139545?page=1 state that the component video input accepts only 480i. No progressive inputs are...

Quote: Originally Posted by Super Eye Back in 1982 or so it became standard at most TV stations to have monitors with component in as Sony BetaCam was starting to be used in most ENG/EFP productions including local news and BetaCam was...