Posts by jmhug

Would it be an option to have the speakers hidden in cabinet when not listening and then be able to open the cabinet doors and bring them forward (more into the room) for listening only time? Something like a slide out cabinet base? ...

Do a load calculation. If your breaker is 15 amp at 120 volts you get 1800 watts but you're only supposed to use 80% of the capacity so 1800 x .8 = 1440 watts or 12 amps. Now look at the lights and equipment on the circuit and...

Looks great!

Running cat 6 close to coax and probably makes the most logistic sense if you are just wiring for internet ready devices like blu ray players, receivers, streaming devices, tvs etc. It really depends on how you intend on using the cat...

As long as you aren't using a unidirectional cable like a redmere then it doesn't matter what end you pull from. Just use electrical tape or some other strong tape to attach the ribbon to the cable. If you want to have another ribbon...

Quote:Originally Posted by Leffy I told my fiance' I was going to put outlets on the half wall and on the back wall. That way if something was setting on there and needed to be plugged in it would be easier. She replied "oh good....

Quote:Originally Posted by sma777 Thanks for the reply. I was thinking that I would have 2 additional speakers near the Air Hockey area play whatever is on the main zone, movie or music. I am intending on putting the tv on a full...

What audio are you going to be sending to the air-hockey area? The movie/tv audio playing through the 5.1 or Zone 2 audio? If zone 2 audio and your amp's zone 2 is powered, which I believe it is from browsing the manual (as long as you...

Post in the Home A/V Distribution forum the regulars should be bale to give you some options/input.

Quote:Originally Posted by MikeD1  The LVP (vinyl plank) says you can throw it right down on concrete (it's a floating floor, click-lock style) but I can see where that could be a potential mold problem. Doesn't look like there's...