Posts by Testpattern

I cannot tell you how many times I did not buy the next XBR because of the Dumbo speakers... UGH!! I simply can't accept the premise that people will buy a top shelf, state of the art, picture technology and accept alarm clock speakers...

Quote:Originally Posted by Micro Hello I would like to ask a question about firmware. I had my television professionally calibrated and was told to keep the auto update off because it may change things that he had changed. Has...

Quote:Originally Posted by Camera Man I assume this problem is power related and the A2020 is having problems handling the 4ohm speakers. Thoughts/Ideas/Suggestions??? I'm running Paradign Studio 100's on my 2020 and they are 4 ohm...

Quote:Originally Posted by Bytehoven Still haven't seen an update available for the 2020. Maybe my unit has the most recent version already loaded. I believe the latest is 1.41 if memory serves me correctly. You can see the...

Anyone have any info on the recent FW update with respect to whatever it did with YPAO? I'm curious to understand what was done with YPAO so I may know what to expect when I go back through my setup.

Question for those of you that know YPAO. I'm I correct in understanding YPAO basically.... o Identifies the distance to each speaker for setting delays for time alignment; o Identifies speaker size based on low end frequency...

I experienced the very same situation last night. Update via the internet failed with code 2000 and upon re-power exhibited ROM Error. Totally dead, no reboot, nada.... Yamaha Tech Support had me go through the "USB Recovery" as...

Quote:Originally Posted by ls1lj see minor differences between the 2 like HD radio FYI... I don't know if the HD Radio implementation is the same as my RX-A2020 but would imagine it is throughout the family. If you live where HD...

Question for those of you that know YPAO. I'm I correct in understanding YPAO basically o Identifies the distance to each speaker for setting delays for time alignment; o Identifies speaker size based on low end frequency...

I was using Paradigm Studio 100s with my 7007. Since these speakers are basically 4 ohms I too was concerned. I talked to several Marantz techs regarding this issue. They all assured me the 7007 could handle the 4 ohms just fine......