Posts by Iron Mike

obvious question if your eyes see different things than what the software reports (which reads data from your meter): what meter are you using, and if it is a colorimeter, are you profiling to a spectro ? - M

Has anybody here had issues with the VT50 changing ISF settings on it's own ? I've been running into weird issues lately, where settings change... on it's own... I've been using CM5 DDC to dial in some CMS changes to saturation - in...

Quote:Originally Posted by djn2004 SS- Thanks for the reply. My numbers do look very similar to yours. Although I don't know what x, y, and Y really indicate. These settings are for ISF day that I use during the day. I did notice a...

Quote:Originally Posted by stash64 I have been disappointed with the VT50 in only a few respects. One shortcoming is noise from the fans and buzzing with bright scenes. A second is the poor sound quality. These first two I was...

Quote:Originally Posted by Smackrabbit All TVs display 422, 444, and RGB, as that's part of the HDMI spec. However, what they don't all do it display them without losing something from internal processing on the signal. okay, so...

Quote:Originally Posted by jrp Note that 4:4:4 describes YCbCr when Chroma has the same resolution as Luma. While it is not described as 4:4:4 since it is not a Luma/Chroma format, RGB effectively has full resolution Chroma. jrp,...

Quote:Originally Posted by sspears The PS3 only offers YCbCr 4:4:4 or RGB. You can't select 4:2:2 YCbCr. The display that I have it plugged into does poorly with any 4:2:2 input. If you look at the nearest neighbor examples in our...

have a question for anybody from Lumagen: when the Info tab of the Mini shows "RGB" as input source, does that refer to full RGB 444 ? Thanks. - M

Quote:Originally Posted by sspears My PS3 is set to YCbCr (its 4:4:4) with Superwhite enabled. so u tested and determined that the PS3 has superior upsampling than your TV ? - M

Quote:Originally Posted by sillysally Thanks Iron Mike, Yes that really helps, running now. Once the LUT is done how do I get it into the Mini??? I would also like to keep the profile and as long as it looks good on the Mini, then...