New Posts  All Forums:

Posts by Fatawan

Quote:Originally Posted by lukeamdman I'm jealous! I've moved the seating all over the place, and it doesn't really change. What kills me the most is that anywhere in the room, if I just stand up from sitting, the null is...
Quote:Originally Posted by coctostan That is exceptional Fatawan. Have you taken measurements across a few seats? I was having people over that night, so it was a quick three-position Audyssey run, one measurement at the main...
I added another sub to the front of my room(LMS 5400 15" with two 18" PRs, same tune as this new sub), plus I have 4 sealed Rythmiks in the back of my room. I used the miniDSP to get the front two subs to play well together after I got...
Well, the powers of the miniDSP have made this look a lot better. Some more fun with REW now: I added the miniDSP to the equation(was using the DCX2496 before--its now out of the loop). I put in a 12Hz LR24 HPF. I also added one wide...
Quote:Originally Posted by brian6751 Cut small panels and seal off each of those foam chambers using PL premium ? Yea, that is what I was thinking too. Here are the graphs--all were done with a 20Hz BUT12 filter in place to protect...
Houston, we may have a problem. It was late when I finally got REW going on my new laptop. I only ran a couple sweeps, but it appears my front chamber is peaking around 36 Hz. That is where the model would indicate the tune to be when...
Quote:Originally Posted by mjaudio I was messing around a little on WinISD using 6th order BP's but really have no idea what I am doing right now. Are the chambers tuned to the same frequency or is one tuned low and the other...
Quote:Originally Posted by Flash676 If Windows is outputting 5.1 PCM but your source content contains less than 5.1, Windows will still be outputting 5.1 but other channels will simply be empty since there is no content for them. ...
Here is the problem--even though my HTPC appears to be outputting 5.1 PCM to the 1403 via HDMI, I am only getting stereo output. The STATUS says 3/2/.1 fs:48kHz, and the DIG and PCM lights are on, still only stereo. Within the HTPC,...
No luck with the EDID change
New Posts  All Forums: