Posts by dftkell

Quote:Originally Posted by Bill Fitzmaurice There's no need, for the same reason that you don't have to wear both suspenders and a belt. But if you want to you may. That made me laugh. Thanks for the reply. I've never been much of a...

I'm am assembling two sealed 1cu/ft boxes for 10" Dayton Reference drivers. PE suggested I put a pound of poly fill in each box. Should I also line the inside of the box with carpet padding? I've read that some people have done...

Quote:Originally Posted by lemonslush That's a awesome table you have. Great setup. I myself might go down the road of a few DIY subs. It's much more cost effective. The wife just decided she wants a HT room now so I have about 10k...

Quote:Originally Posted by wse Really never heard that before! Here's how I have my front three KEF's all at the same height. It's a compromise by having the speakers slightly low--19" off the floor--and then having the TV slightly...

Quote:Originally Posted by djarchow I believe that the flat packs mostly use butt joints and so you could vacuum veneer any panels that would not be overlapped by other panels. Given that the front panel has roundovers and can't be...

Hi, I'm getting ready to veneer two subwoofer flat packs. My brother has a vacuum press. The box won't fit inside the bag so he recommends veneering each panel individually and then gluing it all up. Has anyone used this method? Is it...

Home Theater Mag's recent review of the Minx 21's measured the --3db point of the speaker to be 168hz. That would mean, at minimum, you should be crossing over to your sub at 170hz or more likely 180hz. I've read owners posting that they...

Great. Thanks. Dan

Could someone please help me with a quick question? I have two 1cuft boxes. In order to install a Dayton plate amp, it looks like I have to cut through the brace that runs horizontally across the interior rear panel. I don't see any...

Quote:Originally Posted by trp3383 I have a 55st60 en-route from Abt. What would be the slimiest flat mount that would work? Would 1/2" be cutting it close, or should i go for a 1"? Just sent you a PM wondering how it worked out....