Posts by action_jackson

I'm still waiting for HDBaseT to go mainstream. With HDBaseT you can access any source from any device on your network. For instance you could have a blu-ray player in the living room or media closet and access it from any television in...

I recently ran into a problem watching 3D content on DirecTV and wondered if anyone here has also experienced this and may have a solution. I have the new Genie system installed in December and decided to rent a 3D PPV a couple of weeks...

I would have to agree with dave on this one, you can't really base the calibrated lumens on speculation. There is also a general consensus that LED lit projectors are perceived as being brighter than their measured lumen output in...

Quote: Originally Posted by Honzik1 action_jackson: As I said in previous posts, Q5 should have a glass optic right now and power remote is improved. Mayby look at my older posts and there are some videos and the pictures I am...

Has anyone had a good look at the remote for the Q5? Does it happen to include a power button? The three things that would make the Qumi better IMO would be a remote power button, reliable focus, and improved functionality of the media...

Here is mine, a simple shelf mount with an Apple TV providing video.

Thanks for posting the dip switch settings! I just got to work so I can't compare them to the 3010 tonight, will check them out tomorrow.

Quote: Originally Posted by mankhan any new discovery on DIP switches or every one is scared to try. I tried DIP-SW 6 and Bit 6 and make it on but i did not have any change in menu. I was hoping someone would reply in the 5010/6010...

Quote: Originally Posted by linus_sweden I had the same problem. If you have your projector ceiling mounted the yellow square is in the wrong corner, you are adjusting the opposite corner. I switched my projector to plain front...

Quote: Originally Posted by vincentfox Mine is quite easily seen. When I move R to either extreme it becomes a distinct red line in the test pattern, separate from the green line. Recommend aligning R with R/G pattern. Then do B...