Posts by kwindrem

Quote: Originally Posted by maglor64 Thanks! I already am! O.K., first of all I am under the understanding that film presented on broadcast television as well as film on DVD is already encoded with 2:3 pulldown [look up "Telecine"]...

Quote: Originally Posted by Foxbat121 He is using HDMI which will force 5k to output PCM 2.0 via HDMI anyway. You don't need to use analog connection. Since it sounds like the OP is not getting center channel, the TV and 5000 may NOT...

Quote: Originally Posted by Victor Bergman Funny thing is, that it's the Panasonic TV that is HDMI 1.3 which the 5000 has the incompatibility with. I have no problems sending the audio over HDMI to my Yamaha YSP-4000 receiver, even...

Quote: Originally Posted by Smarty-pants Wow, I didn't expect so many replies regarding the 5000 vs BH200 request. Thanks for all who have given feedback on that. So really, it seems the overall comparison of the two, are that they are...

Does anyone have details on what Film Mode is actually doing, especially in Advanced mode? I assume the display switchs to 72 Hz when the signal received is 1080p24. Correct? Does the display switch to 72 Hz whenever it detects 3:2...

Quote: Originally Posted by dssturbo1 dot by dot? it is available when 1080i/p sources are used. if you have a good source so you dont see any problems on the edges then use it or use full. I had trouble getting dot by dot to stay...

Quote: Originally Posted by Scott Barrett Just got a Samsung BD-UP5000 (upgraded to firmware version 1.3) and need help on the settings: I have an HDMI Receiver (Yamaha RX-V1700), but it does not have any of the new High Defintion...

Quote: Originally Posted by John Schneider I'll look at some point - seems like the setting are best in the "low/middle", rather than off or high - there are some issues with high and off if I recall correctly. No problems with OFF....

Quote: Originally Posted by pras1011 Hi. I am trying to buy either this or the BH200. Can someone tell me which is the better player and which can be made region for sd dvd and blu-ray? I'm not sure which is "better". Depends on...

Quote: Originally Posted by John Schneider Ditto. Also there are different sharpness and NR settings if I recall correctly. Use sharpness carefully! Early in this thread, people complained about black dots on white areas like snow. It...