Posts by bleumax

Quote:Originally Posted by Hi Def Fan @bleumax, For surround, try hitting Receiver, then Auto Surround on the remote. Pioneer DOES seriously need to improve their display and menu navigation though, it's pitiful. The one thing that...

Recently picked up the SC-1222K from newegg. I've had the darndest time getting the surround speakers to work? I know that the wiring is correct since there's volume when I'm in setup mode. I've tried different settings, such as extended...

I just bought a Pioneer SC-1222-K. When I tried to run my Cable TV (Comcast) through my receiver, I get an intermittent signal and a snowy picture. The audio is fine. My current setup is as follows: 1. Cable set top box to the receiver...

Last night the projector prompted an Auto Iris Error. I guess this one is going back.

I received the replacement today. It's like night and day. So far, so good. No double lines and the pattern lines are white, not red and green.

New projector should be here Thursday. Fairly painless process thus far. Fingers crossed.

Thanks for the replies. I emailed them yesterday and they indicated that I'll likely need to exchange the projector after talking to their diagnostics group.

I just mounted my 8350 and the picture is fuzzy with a green outline around objects. When I view the Test Pattern, the pattern has a double line, one green and one red. I'm assuming that this is related to my fuzzy picture. Is there an...

Quote:Originally Posted by Neurorad IIRC, the VC you have has some weird auto-volume something something. Here: http://www.nilesaudio.com/images/legacy/manuals/vcs2dman.pdf 'Niles volume controls use autoformers instead of L-pads...

So, I connected the speakers and speaker selector to a 25+ year old receiver and all the zones work. I still would like to connect the speakers to my Pioneer vsx-1020 receiver. I read in the manual that the ohm range defaults to 8-16....