Posts by tundrSQ

i just ordered the newer 27" monitor from monoprice...this one has displayport connectivity, and monoprice says it does not suffer from the same problems as the current 27" does with mac computers...i will let you know when it arrives if...

This is why i try never to suggest running only one VC in a DVC sub. Sure it can physically be done, and it wont damage the driver. But getting people to agree on what goes on when you do it is always a complicated mess.

if all you want is loud bass....go check out the Digital Designs line of subs...2 of their 12's in a ported box should make you the spl leader in your hood. Plus they sound great...and its a great company.

hifonics odin, and soundstream d100II for me...  

you probably need two of those amps...one for each driver to max them out. And that will require about another $1000 in electrical upgrades. You sure you are up for this? You really want to spend $5 grand on 2 12's? What else are you...

Quote:Originally Posted by lucaswalker1452 I am new to car audio and have 2 Kicker CRV 12"s subs and and a matching amp, and everything else. I'm ready to build an enclosure, but don't know anything about enclosure design/theory....

Quote:Originally Posted by RCbridge What are you trying to do? 2 of those 4ohm subs wired in parallel will present a 2 ohm load to that amp, or in series will present an 8ohm load to the amp. That amp specifies it's power output for...

no but you can get to 4 ohm.....not great...a little low on power at 4 ohm....or go to 1 ohm, just make sure you have plenty of ventilation.

Quote:Originally Posted by patrickvang No it is correct it goes like +,+,-,- correct...and it looks from the picture anyway, that you have one wire in + and the other wire in +....and nothing in either of the - slots.

It looks like you have both speaker leads connected to + and +....that can't be correct is it?