Posts by ndskurfer

Keep in mind - I'm running the 4 BK Advances, not BK LFE's, which are significantly smaller (11 lbs vs 5.5 lbs). The BK Advance has a power handline spec of 75 - 400 watts vs the BK LFE of 400 - 1500 watts. I have no doubt that you...

Mine are evenly powered, no issues from seat to seat. I am perfectly happy with running 1 amp, no need for a second in my opinion. They are not turned up so high that is overwhelms either. I didn't do a 1 vs 2 vs 4 driven comparison,...

It is possible, here is the wiring schematic from buttkicker's website: http://www.thebuttkicker.com/configuration/wiringdiagramsprint/WD_3BK4-1000.pdf Keep in mind, because of the odd # of kickers and running them in series, the total...

Wow, very nice response for how long you have been working at it! I still have a lot of work after a week of constantly working at it.

Quote:Originally Posted by ack_bk I agree with this. Before you go off and spend another $1500-2500, take the time to figure out the room. I would look into buying either a Dayton Omnimic or get a sub $100 USB mic and use with...

I can tell I will be needing to move these subs around, I'm in a terrible 22hz null. I will need to wait for another day to fix that. Here is what REW is giving me before and after Antimode:

Quote:Originally Posted by basshead81 congrats on the new babies! mine should be shipping soon!! looking forward to your review between wireless and wired. I was planning on purchasing the rocketfish sub links that run on a 5ghz...

Update: I did run some sweeps on 1 of my new PSA XS30's wired vs wireless. I did find that there is a large gain difference (roughly 10db), but this is easily fixed on the sub gain to compensate. The bigger concern that we all have is...

Quote:Originally Posted by tboe77 Hey, everybody. This is probably a question for Tom, but I thought I'd post it here, as the XS30 owners may be able to answer it as well. I'm planning to buy an XS30 next month. It will be going...

Quote:Originally Posted by basshead81 would i be better with dual xv15's or one xv30? I remember Tom stating that xv15's will have an output advantage, plus you have the placement flexibility