Posts by plesiuk

Has anyone ever tried installing the Super 727V firmware on a Maggie H2160MW9 (non A model) and what were the results?

Quote: Originally Posted by rkg22 here's a closer shot of just the crystal and the installed cap... Hi rkg22, Will the following capacitor on Ebay work on my 513 and 515s that all are running about 20 seconds fast per week? Thanks...

Quote: Originally Posted by BIGA$$TV Rats!!! My 515 had been set to all-manual clock setting. But, it had been losing too much time and it would require too frequent correction. So, I thought I'd go to the manual auto clock set. I...

I have a Maggie 2160 and a Phillips 3575, in both the clock runs about 2 seconds fast every day. I have to reset the clocks every week or two. I would like to buy the 515's but only if they keep fairly accurate time...

I only have composite cables connected to a DVR. The only items I should have in my active input source list is TV and AV1. Why is PC included as an active input source when no cables for it is connected. Is there something in the menu's...

Quote: Originally Posted by wajo Wordsmith, the much-better remote for the 2160 also operates the 2080, so you can check the main Sticky page for where to get that remote, if interested. What are the significant differences between...

Quote: Originally Posted by stump69 I have the 3575 and the 2160. There are very few differences between the 3575 and 3576. Operation, programming and the remotes are identical. There is a firmware update which, from what I'm reading...

Has anyone used the onboard speakers. Does the sound seem acceptable? I don't have a separate sound system and this Sceptre would be replacing my 19 year old 46" RCA projection TV with ok 5 watt speakers. TIA....

Has anyone tried picture in picture (PIP)? Does it work well? If you have the digital tuner in the main picture, what are the other sources that you can view in the sub-picture? TIA....

UPS "Ground Shipping" trucks normally do not roll on Saturdays and Sundays. Your TV departure scanned (put on truck) Friday evening, but the truck might not have departed till early Monday morning.