Posts by maxcooper

If ported, consider using something other than fiberglass, so you aren't blowing glass fibers into your room. -Max

In addition to the other remedies, make sure that you strip enough of the insulation so that the bare wire sticks all the way through and out the other side of the connector. -Max

I cut the recess and hole for the SEOS-15 in the baffle today. To cut the recess, I followed these basic instructions: http://www.exquisiteaudio.com/baffle.html The first challenge was holding the waveguide in place to cut the...

I just cut a recess and hole for a SEOS-15 waveguide in the baffle of a speaker that I am building. I like doing this stuff, but it took a few hours and made a big mess. It really makes me appreciate what a time-saver Erich's flatpacks...

Quote:Originally Posted by dworthington59 Thanks for the links Max. I was on the fence with the NU3000 and fan mod until I read your post. I plan to power a pair of 3pi subs with it. Amazon has a promotion of some kind which...

Tonight I did fan mods on both an iNuke NU3000DSP and an EP4000. A week or two ago, I ordered a fan for the NU3000DSP mod. I was looking at these two, and ended up accidentally buying them both: Nexus 80mm Real Silent Case...

Thanks for sharing your painting tips. I'll be painting a cabinet soon, and your specific suggestions helps a lot. -Max

If anyone in silicon valley would like to learn how to put their crossovers together, or just have me put them together, send me a PM. You supply the parts and I have the tools. --Max

Sorry for the car analogy, but there's a theme in this thread that reminds me of "everyone who drives faster than me is a maniac, and everyone who drives slower is an idiot." Everyone who listens louder than me is maniac, and everyone...

A little more progress: I cut the woofer recess and hole tonight. I cut the recess on the front side first, which took a few passes at different diameters. I also made a final pass on the front at the cutout diameter at full depth. But...