New Posts  All Forums:

Posts by myhousekey

Quote: Originally Posted by myhousekey Since both companies have reasonable return policies, I went ahead and bought a 30' and 35' cable from both BJC and Monoprice. (Depending on where I mount my projector I may be able to get away...
Quote: Originally Posted by wse HDMI either works or not it is all or nothing, I had three HDMi cable from monoprice fail for no reason what so ever! I Have one 45 feet Belden from BJ and so far works like a horse Did it fail from...
Quote: Originally Posted by Colm It means that the BD player selected 1080i based on the EDID information it received from the display. Try forcing the BD player and/or display to 1080P. Good call. Just went into the DVD player...
Quote: Originally Posted by myhousekey Since both companies have reasonable return policies, I went ahead and bought a 30' and 35' cable from both BJC and Monoprice. So I'll compare the BJC Series-1 Belden Bonded-Pair HDMI cables...
Since both companies have reasonable return policies, I went ahead and bought a 30' and 35' cable from both BJC and Monoprice. (Depending on where I mount my projector I may be able to get away with a 30' cable which is why I bought 2...
Quote: Originally Posted by highroler I purchased one of each - MonoPrice and Blue Jeans' BJC Series-1 for a 40' run. Performance has been identical on multiple sources over the last year. I'm in a similar situation (need about a...
Quote: Originally Posted by wnl And I agree with Bob Whitefield. If your wall can accommodate it, you really should consider a 2.35:1 screen. Watching cinemascope movies on one is a fantastic experience. I guess its a matter of my...
Thanks Frank and Bob. So just to make sure I'm 100% clear... With my projector mounted slightly above the 16:9 screen (inside the limits of table 1), I won't need to do any manual vertical shift when my source material changes from...
Quote: Originally Posted by wnl No this is not true. With either 16:9 or 2.35:1 you can have the projector above or below the screen. I project on to a 2.35:1 screen with my projector a good foot or more above the screen and it works...
Quote: Originally Posted by chenthu Ok, please help, so the projector does *not* have to be within the screen, it can be upto 2'6" above the top of the screen? Going through this thread, there are some that says one vs the other.. I...
New Posts  All Forums: