Hmm..I'm on version 220.127.116.11, I'll install 18.104.22.168. and give that a try.The light diffuser was swung out of the way for the readings.I am using a USB extension cable to run the meter to my laptop. Could that be the cause?
I should have mentioned, I was using this thread as a starting point for my calibrations.
I turned off all dynamic enhancements on the set or the blu-ray player.
Used the Rec 709 gamut.
Changing the white point on HCFR to D75 resulted in a slightly yellowish white. This was much better than a redish white
Do I need to modify the integration time? I used 0.5...
Hey Vega,When I put the meter right on the screen I got even more reds. lol!!I tried to keep ambient light to a minimum. I ran the measurements with no lights and only my laptop on which was about 10 ft away from the screen.I did not use a correction file. In HCFR I was presented with different display types. I tired direct view and projector types. Projector gave me the best results.Where would I find the meter Correction file for the i1 display pro 3?I did try to...
I need a little help.
I am using HCFR the i1 Pro display 3 meter on a Samsumg HL61A750 LED DLP TV. When I calibrate the grey scale to HCFR I get a noticeable red push.
The red push is so much that you can see red in each step of the grey scale and the 100% white field
The only way for me to avoid the red push is for me not to adjust the grey scale and white point.
I am using the AVS709 Disc for the the reference measures and have the i1 setup about a foot off of the...
'Oblivion,' 'The Croods,' 'Monsters University,' 'Iron Man 3' Will Get Atmos Treatment
Oblivion will be mixed natively in Atmos...
"Oblivion is currently being mixed in Dolby Atmos at Skywalker Sound by Academy Award winning re-recording mixer Gary Rizzo (dialogue and music) and re-recording mixer Juan Peralta (FX), as well as sound designer Ren Klyce. This is expected to be the first native Atmos mix on a Hollywood...
What are your setup recommendations for someone with dual VTF-15's?
MY room is 22.5 x 10.5 x 7.5 (LWH).
Currently I am running one port open EQ1, Q7, and volume at 9-oclock.
I am interested in the low end benefits of the sealed mode, but am quite happy with my outputs so far.
Thanks for the info.I did try 4:2:2 with deep color and VIDEO CONVERT on and I passed the chroma multibust pattern.Ultimately I decided to go with 4:4:4 and the VIDEO CONVERT off as I could never display all the levels of blue in the other modes.4:2:2 at 8 or 12bits, with VIDEO CONVERT enabled or disabled always combined one of the blue levels in the clipping pattern.YMMV