Posts by ekstudman

I am aware that flickering problems are a common issue with many lamp projectors. However, I don't believe it is any more prevalant in the HD70 than any other type of projector on the market. I have never experienced this issue with my...

I recently purchased a Harmony 1100 remote with the RF extender so I could control my components and projector without direct line of sight. I have attempted to hook my Optoma HD70 projector directly to the Harmony RF Extender with 1/8...

I've heard rumors there is a difference between using mono or stereo mini jacks when connecting components directly to the RF Extender (although I'm not sure which one works and doesn't). I am trying to connect my Optoma HD-70 projector...

Can anyone tell me whether the 1100 is setup to organize and control multiple zones, i.e. living room, media room, etc? One of the biggest complaints I have with my current remote (880) is that you cannot set up different activities for...

Yes, I believe the harmony remotes that are RF capable (890, 1000 and 1100) send both an RF and IR signal. While I assume Logitech has already considered this when it built the remotes and RF extenders, I figured I would ask anyway...

I have the same receiver. While I do not use the 12v trigger in my setup, I believe it is used for those who have a zone 2 setup which is powered by a separate amp or receiver. The 12v trigger can be used to remotely turn on the second...

For those more experienced than I - I just purchased a harmony rf extender which I plan on putting in my media closet. However I have a projector on the ceiling which I'm trying to hook up to the extender via the ir port (headphone...

I loved Ray Jr.'s sign so much I had Dave Rainey cut me a sign as well. I love it! Anyone interested can contact him at david@russell-steel.com.Attachment 122535

Update from my previous post re Audyssey/speaker detect issues with the 706 and to those who are also experiencing the same problem. I e-mailed Onkyo and got the following response: "Try resetting the receiver that is on the front...

As an afterthought to my above post (and I realize this probably is the wrong thread to be posting this in) but is running the Audyssey setup all that important or can I just calibrate manually? Everything else seems to work fine. Is...