Posts by cinquemano

Quote:Originally Posted by pwrjnky You do audio too? Yes, Jeff did my audio also. I have a Pioneer VSX-1021 and I had used the MCACC that comes with the receiver, it sounded good but when Jeff finished with the audio it sounded...

Quote:Originally Posted by pwrjnky I'm like a kid counting down until Xmas!! Finally got the call from Jeff Meier. He will be here in 3 weeks to do my audio/visual calibration. Been waiting 3 months and this last 3 weeks is going to...

I recently purchased a 65 inch VT50 recently and had an appointment for calibration scheduled for Jan 15th by Jeff Meier. Up until the calibration I had the tv on THX Cinema and I thought it looked great but once Jeff was done it looks...

I am curious if anyone has had this problem. I have a 60xbr1 and I purchased a brand new osram lamp from our local sony service dealer, when I put it in the highest reading I could get using my meter on a 100 IRE window was about 24 ft...

Yea, the optical block was changed in 2008 and it has performed very well, do you think the optical block affects light output? Thanks

Mike, I put in a brand new bulb in my tv yesterday even if I put the tv in vivid mode the highest footlamberts I could get was around 20 whereas last year when I put a new bulb in I was getting over 40 easy. For an experiment I...

Sorry for the confusing statement Mike, what I meant to say is that by me not adjusting green gain/bias I would have to raise red a lot to get green down to a manageable level. But by adjusting green as you did I was able to keep red down.

Mike, I used your 2 WB and 9 DRV numbers. When you were adjusting white balance did you adjust green gain/bias as well as red/blue or just red and blue gain/bias. I have read that one should only adjust red/blue and leave green alone...

Mike, I checked my ug_of numbers and they were all at 128. I then changed the 9 DRV numbers to what you had and I was able to get the contrast to 136 before clipping and I lowered the bias and gain numbers to yours as a starting...

Thanks Mike, do you remember what your gamma reading was? I like calibrating with the advanced iris off better than with it on and it would give a level gamma reading instead of the ragged one with it on. The problem I kept having was...