New Posts  All Forums:

Posts by rperlberg

I'm encountering some problems with the switch from Daylight Time to Standard Time on my Panasonic DVD recorders and I was wondering if anyone else is seeing these problems and can offer any advice. Traditionally, I have gotten into...
Quote: Originally Posted by kama168 Dear all, I am interested in DST problem and found here. My country doesn't apply Daylight saving time and I am confused about this culture and finding some answer in wiki. A question is if the...
Quote: Originally Posted by gastrof The coupon boxes aren't in the same catagory as the usual digital OTA tuner. They're not MEANT to be "fancy". All they're meant to do is convert a digital signal into a form an older TV can...
Quote: Originally Posted by highheater and this is done with the channel buttons on the remote (as an undocumented feature)? Documented on page 38 of the manual.
Quote: Originally Posted by uderman just want to make sure....i can transfer vhs tapes to dvds right ? on all above units The combo units (38 & 48) can transfer VHS to DVD. The 18 & 28 can be used to transfer VHS to DVD if...
Quote: Originally Posted by jjeff Sounds like a odd problem indeed. What is the signal strength on the Panny DVDR? I believe it's the status button on the remote and then theirs the selection for OTA signal strength. Press "DISPLAY",...
Quote: Originally Posted by viewer29 So if you can't find a CECB in your local electronics store, try your local grocery store. When I received my NTIA coupons, they came with a list of CECB vendors in my area. Three of them were...
I just confirmed on my DMR-EZ48VK that tracking can be adjusted during an internal copy. There's more on the tracking issue here.
Quote: Originally Posted by Beeper I tested firmware F103 today. I manually set one timer for 5 hours duration with the inactivity timer setting at 4 hours. The box powered off after 4 hours. Thank you. He must have been confused by...
Quote: Originally Posted by lgodave They might have designed the DTVPAL timers NOT to power down to allow for "soft" padding of a program. Rationalizing. It wouldn't do you any good to have the box stay on past the programmed end...
New Posts  All Forums: