Posts by blackrain

Quote: Originally Posted by BobL It could work because you adjust levels and distance in the processor. 12 ft is a bit far for a bi-pole, a mono-pole would be a better choice for that distance. Hanging the speaker would probably be...

How many ERD-1 owners use their ERD-1s with non-Emotiva front LCRs? Is matching timbre a real issue?

I possibly need to install 1 of my ERD-1s on a ceiling mount. I found this online (which appears to be ERD-1s on an LCD mount): http://i150.photobucket.com/albums/s...7_resize-1.jpg See reply #27...

And an even further possibility. If 9-12 ft is too far away for the right side speakers, then I could compromise on one side (the right side) having a ceiling mount. Make everything symmetrical. Both the left side and right side...

More pictures. So let me know what you think of this possibility: (1) To the left side of the sitting area, mount (on the wall) the ERD-1s(where the red X is marked at about 5 ft high): -4 1/2 ft away from the left-most part of...

Quote: Originally Posted by Knucklehead90 I can sympathize with your wanting to mount them permanently. Some brackets should be easy enough to fabricate from wood. Paint them to match the decor. Can you specify (drawings, pictures,...

Quote: Originally Posted by BobL The enclosure for either the DS7FX or DS7PR. http://www.smarthome.com/67587/Niles...rs-Each/p.aspx Like I said I'm not fond of open back in wall or in ceiling speakers. Those have variable performance...

Quote: Originally Posted by Knucklehead90 You can try mounting them on the ceiling behind you if you are only going with a 5.1 setup. In/on-ceiling speakers are a last resort IMO. I think that lining the tweeters up to the front/back...

Quote: Originally Posted by BobL With any speakers there are good and bad, the same is true of in-ceiling speakers. Getting the right speaker for your application is what's important. Any speaker will sound different between being...

Anyone mount an ERD-1 to the ceiling? http://www.avsforum.com/avs-vb/showt...=ceiling+erd+1