Posts by yacht422

Quote:Originally Posted by Bob Pariseau ^ I would recommend using the D2 or D2v for upscaling 480i SD TV broadcasts and 1080i HD TV broadcasts (rather than passing the signal through the HDMI Inputs of the 103/105). For a TV set...

a question primarily for Bob, as he has been (is?) an Oppo resource. RE: chips: Who has the better video chip, D-2 vs: oppo93 and D2 vs: oppo 103 the same question can apply to the d2v, but i have the D2 Does the D2 pass 3-D, or...

Quote:Originally Posted by Bob Pariseau My comments had to do with the potential for handshake and bit error problems -- i.e., the potential of the cable to fail -- not audio quality. But quite candidly I think it HIGHLY unlikely...

yup! nuttin cheap 'bout dem der cords!

Quote:Originally Posted by Bob Pariseau ^ Try setting a specific output format (e.g., YCbCr 4:4:4) instead of Auto. Also try replacing the HDMI cables involved. Keep in mind that too short an HDMI cable can cause problems just like...

a point of clarification, if you please. re: first reflections; is there ANY advantage of having 2" rfg, followed with a 2"air gap, followed by 2" of rfg, and then either the wall or an additional air gap, TBD? thx walt

thx for the link: as you know, there is a LOT of information there! walt

Quote: Originally Posted by yacht422 big request: i remember earlier in the year that someone posted 'plans' for the building of an elevated rear seating platform, but treating it as a bass absorber, complete with proper hole diameters...

big request: i remember earlier in the year that someone posted 'plans' for the building of an elevated rear seating platform, but treating it as a bass absorber, complete with proper hole diameters and locations. it will take me a week...

Quote: Originally Posted by myfipie Actually, also if done right the limp membrane (covering the front) can increase the low end absorption. by limp membrane, do you mean 3 mil poly? (per dennis' recommendation) and is this...