Posts by yacht422

walt here, with a arc V3 issue.(D2 !.33) down loaded two weeks ago - performed two measurements, all well. today, to do a third measurement, and the wheels fell off. cannot go beyond three complete sweeps(l:C:R) error 0X03 "cannot...

walt here, with two questions: 1) in setting up the surrounds, there are two options;a)dipole, and b) direct radiating. what are the differences in the processing(will i detect a difference?) 2) i added an old oppo unit (DVI to HDMI) to...

Quote: Originally Posted by CharlieU I use the SVS AS-EQ1 (Audyssey) to handle my two subs and it does a great job. I run it first then run ARC. Using the same mic positions for both systems, ARC has a whole lot less to do for my subs...

Quote: Originally Posted by jayray Walt, I have listened to several Audessey setups with the same speakers and rooms that are similar to mine. To say the least I have been underwhelmed by the sound. I can't say that about ARC and in...

Quote: Originally Posted by jayray Are you talking about audessey for subs? I haven't heard of this. The PBK I have used and it smoothes out bass response as well as ARC since it is ARC for paradigm's subs. I may be biased but I would...

walt here. d2 and arc user. are there any on line who have insights regarding the paradigm PBK-1 for sub equalization, vs: the audyssey product for the same purpose? PBK works directly with arc, but the adu - - is an outboard unit, as i...

toole in his writings seems to suggest that is listeners are trained to do so. (visit the harman site and read dr olives musings on the subject) given that each of us has a different set of ears, listening in a different room, to...

Quote: Originally Posted by Kal Rubinson Well, if I listened to graphs, the answer is clear. However, I suspect that this test compared flat, unadorned, completely reflective side-walls with fairly-well treated, absorbent ones. This...

Quote: Originally Posted by Bob Pariseau Raising the cutoff/crossover for Center a bit might help handle that residual error around 60Hz. Try 65, 70, or 75Hz. You can experiment like that without having to re-Measure. You won't be...

sorry for the delay in responding - just as i finished measuring, the site went down. also sorry for the confusion i caused. to be brief: all my systems are fine. using v1.33 and latest arc, all work fine, save the sub measurement...