Posts by kwk1

I'm not sure if I asked before, but what setting would lower the white level? On some whites, like football jerseys, they are crushed with no detail. Kind of like crushed black, but with whites.

Quote:Originally Posted by BigCoolJesus Like I said, I was just under the simple impression that having the original receipt to prove validity of the selling company (i.e. authorized dealer) and purchase date was all that is needed....

I guess it depends on what you can tolerate. Mine was noisy on the floor in a corner during the slide prep. Now that it's set up on a stand, it's not bad. With any volume, it's pretty much a non-issue.

Got a VSX-1326 / 53 and finally got Airplay working on the iphone. I have to say, this receiver is pretty nice and puts good power to my Cerwin Vega D-7's. Just have to go through the settings and see what sounds best for music. I have...

Thanks for doing these detailed tests Bryan, I'll have to check out the APS settings.

Quote:Originally Posted by macdim I updated a 60PA6500-UG with the latest firmware. No issues. Took about 5 minutes from the time I inserted the USB stick. Thanks macdim.

Quote:Originally Posted by ocellaris Outside the realm of TVs, LG has a fairly poor history of firmware support (by either never updating phones, or breaking things with the updates). I wouldn't be surprised at all if the firmware...

Quote:Originally Posted by grnbd Hit settings-> Options Orbiter and wash are in IM Settings Thanks grnbd, I went through the manual again and found it was in IM settings. Had to try and remember where IM settings were, lol. Now have...

Quote:Originally Posted by grnbd Set your gamma to high, and color gamut to standard did wonders for me. I would tone down the color temp as well. There are different opinions on contrast during break in. Some say to set it high too...

Quote:Originally Posted by - wardog - Ken, I'm curious, what's the altitude where you live and or have your display at? No mountains here, I live on the prairies. Just a bit above sea level. I finished the slides and hooked the tv...