Posts by alamone

Original owner of F15HP subwoofer, ordered direct. Black ash finish. Purchased from Ascend Acoustics on 03/04/2012. *** Transferable Rythmik Audio manufacturers warranty, 10 months left on electronics and 3 yrs 10 months left on the...

I've concluded that trying to find a readily available large screen (40" plus) LCD with less than 2 frames of lag over HDMI is near impossible. I'm just going to go for the 37" Panasonic Alpha-IPS model TC-L37U3, as it seems to be the...

From the Sony site: "Clear mode to reduce motion-blur - If you’re a gamer, you’ll love the clear mode setting, optimises and enhances lost frames for great clarity of high-speed action" This sounds more like 120hz frame interpolation...

Quote: Originally Posted by JimBob1971 Can you clarify that please? How many frames per second were being displayed and therefore what was the real lag? If a game was running at 60 fps then 3 frames isn't that much of a big deal, but an...

Mine's at "Shipping Update" on the order status - does that mean it's shipping soon? Anyway, 4gamer (Japan) posted a review with various game impressions http://www.4gamer.net/games/038/G003884/20111105002/ Subjectively, input lag...

I called last week and he said there will be an update this week, but who knows...

50MB/sec sounds awfully slow, even for port multiplier. Is this the one where the port multiplier chip itself has integrated raid5 functions? When I had 4 or 5 drive RAID5s on my old Highpoint 2314, I would get read/write speeds of at...

The UEK you linked is basically two of the standard chenbro SAS expanders, a power board, and a form factor where you can screw it down into the place where the ATX motherboard ports would usually go instead of a PCI slot. This would...

You should be able to transplant the Areca array between different cards. AFAIK pretty much all raid implementations store the raid metadata on the drives, and most raid manufacturers try to make the raid metadata compatible between...

Just FYI, the cache *should* still persist even if you didn't have the BBU when you do a soft or hard reset, because you're not physically cutting off the power - the card is still getting juice from the PCIe goldfingers. Even if you had...