Does upgrading the firmware wipe any settings?
I've been hesitant to upgrade to the latest firmware because of all the custom picture settings I've applied to different inputs.
This is for a 47LM7600. Thanks.
Quote:Originally Posted by thx1138 You first have to unpair the Magic Remote from the TV by holding down both Home and Back until the red light on the remote flashes. You should also notice that the red arrow is no longer visible on...
Anybody know how to get a learning remote to switch inputs? I was able to teach my TiVo remote to bring up the input switching screen, and I can even move to other selections within the screen by pressing the button repeatedly. But I...
At this point the setup seems to meet my needs, so I think I'll leave well enough alone.
Thanks again for all the great info and advice
This thread has been a tremendous help.
Quote:Originally Posted by Selden Ball You're very welcome.
Your experience suggests that it really doesn't support 24fps natively, even though it should be able to. However, after making my post, it occurred to me that the problem...
Quote:Originally Posted by NicksHitachi The PS3 is a fine player, it is on par with any entry level player up until you get to the $500 mark IMO. For my money the next upgrade of a player are the $250 mark players most notably the...
Quote:Originally Posted by arnyk Some of your problems may come from using the PS3 as a disc player. Its amazing how competent some of the ca. $100 Blu Ray players are. Might one of them help you?
So the PS3 is no longer considered...
Quote:Originally Posted by Selden Ball I fear you may be stuck with choosing whichever you decide is the least bad among the various options available to you:
0. replace your TV with one which can handle 24fps with no processing...
Well I did try all the various combinations outlined above and none of them kept the audio in sync, unfortunately.
So I went back to the approach which synced audio correctly: PS3 -> (hdmi) -> TV -> (optical out) -> Denon
After a bit...
Quote:Originally Posted by jdsmoothie There's an issue with your current configuration of PS3(HDMI) to the AVR so try other configurations to include what I suggested as well as both HDMI and optical to the AVR with audio being...