I'm still slightly pissed about this horizontal "banding" issue on my set. Like I mentioned a few pages back, really only visible on light screens, but it's there. I can't tell if its an issue with the filter or with the phosphors. ...
Originally Posted by CSIG1001
Why get any of these TVs when the 2012s will be out in 2-3 months
A mid level 2012 tv will blow away a D8000
This is entirely false. The 2012 Samsung's are more or less the same thing, with a...
Originally Posted by fcwdev
I have something similar forming on my panasonic. So far I think it is some form of IR/burnin, maybe due to my cable guide. I locate my bar right at one of the horizontal lines in the guide.
This whole ITO vs ITOless thing is disconcerting. I had a 59D7000 that was an October 2011 build first, but I upgraded to the 64 and ended up with a July 2011 build.
I noticed immediately the blacks seemed blacker on the 64 compared to...
Originally Posted by zieglj01
Just hook it up and play - they are 6 ohms.
Ok thanks. I was just curious as the first section of my receiver's manual is to configure for either 6 or 8 ohms.
I think it's funny the pioneer 1121...
So the front of the SP-BS21-LR manual says the nominal impedance for the speaker system is 8 ohms.
Inside the manual it says it is 6 ohms. I have a VSX-1121 that you can apparently configure for either. Which is correct?
Originally Posted by dxjnorto
I do see that. It's probably the luck of the draw. Don't pause your TV and watch a grey screen then. Sorry.
Saw it originally on normal content, but took the above pic on break-in slides. Is this...