Posts by cheezit73

Quote: Originally Posted by Mfusick  Are you saying you always want it on... or always want it off. personally I prefer turning it on when I want it.   Quote: Originally Posted by...

What you want to do will not work unless the two receivers are the same! I know this first hand as I had my HTPC HDMI out to a 1x2 HDMI splitter going to two Pioneer Elite VSX-01 and 21 receivers (very nearly the same thing.) This...

I am loving the door! Good work!

This is looking really good! Can you do me a favor and post a close up pic of how you did the side frames where they meet the baseboards. Did you just build the frames to match the contour or notch the base boards?

Quote: Originally Posted by brian6751  Cheez. i love how this turned out. dark walls and ceiling to get the lighting you want for watching movies, but the trim and design makes it still casual. very nice job! i see...

I just realized that I never updated my Phase 3 post for completion of my SEOS speakers which are absolutely amazing! Check out my signature for my build thread in the DIY section.   Picture with temporary setup until I finish...

Take a look at the beginning stages of my build, I used some metal plates to help secure my MDF light tray at the joints. I used wood filler and it has held up reasonably well. Some of my filled joints have cracked a little bit but you...

I spent hundreds on two custom sized black out blinds which leak light around the edges and I can count on one hand how many times a year I open.  If I had to do it all over again I would have bought standard blinds and painted...

Man you really inspired me here, I think I am going to remove the shades on all my sconces and chandelier in the theatre room and replace the bulbs with the Edison style. I was browsing 1000bulbs.com and found this picture. Kind of the...

Yeah unless you could find some scrap that worked I would think using wood and PVC pipe or the like painted to look like metal would be the way to go. Also I would lean towards bronze and copper type finishes!   Cant wait to...