Posts by edd1e22

Guys, thanks for all the detailed responses. So much info and terminology I'm going to have to do quite a bit of googling to discern what all this means. I was told by quite a few people that it would be too dim and they actually...

Thanks for the most informative response; this is why I always turn to avs forum! Without using a using a Da-Lite screen and "expanding" the budget on the projector, what would be a good fit for a screen of my size? I will definitely...

I've been looking at possible projectors for my setup and a friend recommended the JVC X95R? I'm an admitted newb to projectors and thought I'd get some feedback from the forum. I'm not a JVC junkie; this is what a friend threw out there...

All the vendors recommended doing CAT5e. I asked about CAT6 but they said the added bulk of the wire/components would drastically increase costs. They said for media loads, CAT6 isn't really necessary. I'd love to hear the input from...

Quote: Originally Posted by WS65711 Only if you want it to work . . . That's classic!

Thanks guys; I thought I was being stupid!

I'm helping a friend do his low voltage/networking in his home which is pretty sizable(14k). My house is significantly smaller(2k) and I run wireless rather than hardwires. I looked over the proposals he got(120cat5e/35coax) and thought...

I'm going with the Anthem MRX 700 which is 120w per channel. Some of the runs are pretty long; I'm going to measure the plans and get the distances but the rears are over 60' I think.

I'm writing up a prewire spec for a 9.2 home theatre system. The speakers will be built in to the walls and I'm thinking 16/2 for the wires but not sure how I want them terminated. For the subs, I'm thinking 1 x 16/4 and 1 x rg6quad....

Sorry if this is a dumb ? but I'm trying to hook up my Energy Microstar sub my friend gave me to my amp and it has two inputs(red/white) and outputs(red/white). Do I need to hook up both? All the subwoofer wires are single strand so...