Posts by CZ_the_DAY

chupinsky27, I had to read twice....thought it was your father that died at first (d'oh). I second what lostcase said and I'll attempt to address polarity related instructions you have addressed. SomethingMore, I was born there, visited...

Quote: Originally Posted by woodz93 ....I put in Radio Shack 100uf 35v caps. A deviation from the ones CZ_the_DAY recommended; if that is dangerous let me know.... You're surely better off running that AVR symptom-free by any means...

Quote: Originally Posted by fishstickjesus Stopped by my local electronics shop today and they only had 100uF, 16V units. No 10V. So, now that you've had yours in for almost 3 months, any issues? CZ: Any reason not to use a 16V...

Quote: Originally Posted by wax_ya_paps I've fitted the 4 replacement 100uF caps to my 606 (85deg as a test, 105deg arriving soon so will have to open the box again) and all is looking good (for now) Has anyone tried installing any...

Quote: Originally Posted by SomethingMore Bump. ...I went to a local store (www.active123.com), and picked up the following: 10 x Electrolytic Cap. 25V 100MF/uF lol...i've actually been in there...not as much though since they moved...

Quote: Originally Posted by mycotopian I had my receiver repaired under warranty. They just replaced some capacitors in the shop. They did however give me a copy of the technical bulletin from Onkyo and I will also include the details...

Quote: Originally Posted by NoAVsense Where can I purchase these capacitors? If I hadn't scavenged mine from a two year old DVD player (R.I.Pieces), this may have been one likely...

Quote: Originally Posted by Capricio Well, my parts finally came in. I bought enough 100uF (x30 105C) and 1uF (x12 ceramic) to fix 3 receivers. I have a 606 that is showing very bad symptoms. It used to be my main receiver but I...

Quote: Originally Posted by gesav I have a 606 with the HDMI problem, too. Started needing to be warmed up (longer & longer), then shut off & on, to get a pic. Then one day, no pic at all. I just replaced the 100mf's...

Quote: Originally Posted by Theodore King I own a TX SR674 that's just over 3 yrs old. It recently began to show signs of premature "old age" - it took several minutes to "warm up" with an HD channel selected (through HDMI or component...