Posts by arthur92710

Im not familiar with the date code used by TI on these parts. Is there a guide to decode the numbers on the chip?

Im not exactly familiar with that model, but I have a few ideas. Make sure the DVI cable is connected AND screwed in. Make sure all the other wires are connected. If you left the rear cover off make sure you put something into the "door...

Hi guys, I have a question regarding the DMD chip in Mitsubishi DLP TV's. I have a WD 73733 that is a few years old, the part number of the DMD is 1910 6103W. This TV has the white dots problem( hundreds of them). I bought a used...

Anything internal? I was thinking about something like Hauppauge WINTVHVR1600 DUAL Tuner or AVerMedia AVerTVHD Duet.

What about HD?

Thats if I connect it straight to the wall jack, right? What if I connect it to the output of the cable box(Coax).

Hi, I have a few questions about TV tuner cards. I have a cable subscription with Optimum, with a cable box. How if I get a tv tuner card will I be able to recode channels like CNN? CNN only comes trough with the cable box.

A 4850e should be fine. Actually I have a 4400 at 2.3Ghz, Rightmark downclocks it to 1Ghz and lower voltage under low use. It plays 1080p with no problem. BTW, the 780g on the mobo does most of the decoding.

My large video collation has some videos in both SD and HD, is there a way to pick which you want to watch without having doubles? Of corse I would watch the HD videos, but I have a Xbox with xbmc that cant play HD videos so I need to...